DCCS2 subassembly 4 port unequipped

130D2CBU4-E

• DCCS2 4 port subassembly, unequipped for modular termination units in Modul design
• solid stainless steel support
• fastening by a knurled screw in 19-inch subracks
• easy mounting/dismounting to/from 19-inch subracks in 19-inch cabinets (plug and play)
• design: DCCS2
• suitable RJ45 modules: 130B11-E, 130910-I, 130910-I-B1, 130909-I, 130909-I-B1, 130908-I and 130908-I-B1
• suitable RJ45 couplers: 1309A0-I
• suitable fiber optic modules: 15091001-I, 15091070-I, 15091071-I, 15091072-I, 15091075-I and 15091076-I
• suitable KOAX modules: 130898-01-I, 130898-02-I and 130898-03-I
• suitable Blind modules: 130898-00-I and 130898-00-RW-I

EWIO₂-BM
Ethernet-IO / BACnet / Modbus

110904

Depending on the configuration, the EWIO₂-BM is a compact Modbus and/or BACnet Server, which connects digital and analouge signals from the sensor and actuator level with a Modbus TCP and/or BACnet IP network. With a Modbus or BACnet Client, various tasks can be realised in building and industrial automation. Simple functions and control tasks in building or industrial automation can be created and visualized via the graphic programming interface "Node-RED" integrated in the web interface and the numerous digital and analog I/Os. Two Ethernet Ports with a Daisy Chain function are available for the connection to the LAN network and the chain further Ethernet I/O devices. The system is parameterised, configured and commissioned through a platform-independent web browser. For the upgrade of the sensor/actuator level, MR-I/O upgrade modules can be connected using plug & play jumper plugs and wiring to a second interface of EWIO₂-BM, Modbus RTU devices. An integrated µSD memory card expands the range of functions of the EWIO₂-BM for save settings, data and applications.

MR-Multi I/O Modbus RTU

11084313

The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. 29 I/Os, some of them are configurable, are available for different tasks. With strong inductive loads, we recommend protecting the relay contacts with an RC element. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

BMT-Multi I/O BACnet MS/TP

11089313

The BACnet module BMT-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via BACnet MS/TP protocol. 29 I/Os, some of them are configurable, are available for different tasks. The inputs and outputs can be controlled and scanned by standard objects via a BACnet Client. Module address and bit rate are set with two rotary switches on the front or by software. The relays K1 to K4 are equipped with a manual control and allow manual intervention. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

DCCS2 subassembly 4 port unequipped - Keystone

130D2CKU4-E

• DCCS2 4 port subassembly unequipped for modular termination units in Keystone design
• solid stainless steel support
• fastening by a knurled screw in 19-inch subracks
• easy mounting/dismounting to/from 19-inch subracks in 19-inch cabinets (plug and play)
• design: DCCS2
• suitable RJ45 modules: 13B21-E, 130910KI, 130A10-I, 130A10-I-B1, 130A10-29-I, 130A10-29-I-B1, 130A08-I and 130A08-I-B1
• suitable RJ45 couplers: 1309A0-I
• suitable fiber optic modules: 15091001-I, 15091070-I, 15091071-I, 15091072-I, 15091075-I and 15091076-I

EWIO₂-M
M-Bus

110930

The EWIO₂-M is a powerful data logger for the energy consumption monitoring and energy monitoring in buildings, on machines, plants and systems. Two Ethernet ports with a Daisy Chain function are available for the chain further Data logger and connection to the LAN network. The system is parameterised, configured and commissioned through a platform-independent web browser. The M-Bus and Modbus RTU interfaces enable to read different meters: e.g. electricity, water, gas and heat. Optionally, the measured values can either be sent from the data base (push) or read out (pull) via mail (SSL) or FTP (SSL). Simple functions and control tasks in building or industrial automation can be created and visualized via the graphic programming interface "Node-RED" integrated in the web interface and the numerous digital and analog I/Os. An integrated <i>µi>SD memory card expands the range of functions of the EWIO₂-M for save settings, data and applications.

EWIO₂-M-BM
M-Bus / BACnet / Modbus

110935

Das EWIO₂-M-BM is a powerful data logger for the energy consumption monitoring and energy monitoring in buildings, on machines, plants and systems. Two Ethernet ports with a Daisy Chain function are available for the chain furhter Data logger and connection to a LAN network. The EWIO₂-M-BM can be integrated into a Modbus TCP or BACnet/IP network to perform control tasks. The system is parameterised, configured and commissioned through a platform-independent web browser. The M-Bus and Modbus RTU interfaces enable to read different meters: e.g. electricity, water, gas and heat. Optionally, the measured values can either be sent from the data base (push) or read out (pull) via mail (SSL) or FTP (SSL), from a BACnet or Modbus controller. Simple functions and control tasks in building or industrial automation can be created and visualized via the graphic programming interface "Node-RED" integrated in the web interface and the numerous digital and analog I/Os. An integrated <i>µi>SD memory card expands the range of functions of the EWIO₂-M-BM for save settings, data and applications.

LF-DM4/4 LON

1108561326

The LON I/O module with 4 digital inputs, 2 relay outputs and 2 digital outputs was developed for decentralized switching tasks. It is suitable for querying, for example, switching states and, as a result, switching motors or other actuators. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs and outputs are scanned and activated by SNVT network variables. The input terminals 1 to 4 are wired with the C2 terminals on two poles to potential-free switches or contacts. In addition, a wipe function is integrated. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with screw type terminal blocks

LF-F-DM4/4 LON

110856132670

The LON I/O module with 4 digital inputs, 2 relay outputs and 2 digital outputs was developed for decentralized switching tasks. It is suitable for querying, for example, switching states and, as a result, switching motors or other actuators. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs and outputs are scanned and activated by SNVT network variables. The input terminals 1 to 4 are wired with the C2 terminals on two poles to potential-free switches or contacts. In addition, a wipe function is integrated. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with spring clamp terminal blocks (push-in)

LF-AM2/4 LON

11085713

The LON I/O module with 2 analog inputs, 2 analog outputs and 2 digital outputs. It is suitable for controlling, for example, motorized vent valves and switching on alarm at the set threshold value. The inputs and outputs are scanned and activated by SNVT network variables. The analog inputs can be scanned simultaneously. The analog outputs can be activated proportionally, or previously defined voltage values can be adjusted. Both digital outputs can be activated individually or as a function of an adjustable threshold value. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with screw type terminal blocks

LF-F-AM2/4 LON

1108571370

The LON I/O module with 2 analog inputs, 2 analog outputs and 2 digital outputs. It is suitable for controlling, for example, motorized vent valves and switching on alarm at the set threshold value. The inputs and outputs are scanned and activated by SNVT network variables. The analog inputs can be scanned simultaneously. The analog outputs can be activated proportionally, or previously defined voltage values can be adjusted. Both digital outputs can be activated individually or as a function of an adjustable threshold value. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with spring clamp terminal blocks (push-in)

HUB DC

110486

The HUB DC is used as ballast to operate I/O modules of the C|Logline LON, Modbus and BACnet range to rectify and smooth 24 V AC (alternating voltage). It supplies at the output a smoothed direct voltage of about 33 V DC (with 24 V AC at the input). To convert the supply voltage of C|Logline LON, Modbus and BACnet modules from a 24 V AC operation to DC operation (24 to 36 V DC) reduces the thermal load in the I/O modules and extends the service life of the included components. The device is designed as half-wave rectifier with common earth point (input A2 = output 0 V) to be directly used in 24 VAC systems.

RM1-I 24 V DC

11051225

Relay module for large loads and high inrush currents such as LED lighting systems and lamp loads for electrical isolation between logic and load.

• Inrush relays for large loads and high inrush currents
• Connection with screw-type terminals
• Socket 2 storeys
• Pluggable relay
• With labeling field, socket, bracket and LED-module

MB-DIO2/1-IP Modbus/BACnet 230 V

1108110526IP

The MB-DIO2/1-IP 230 V module in IP65 housing with 2 digital inputs and 1 relay output is developed for decentralized switching tasks. Suitable, for example, to accommodate light switches and window contacts in a room, and to switch light strips or to use as blinds control. Motor-driven actuators (e.g. ventilation or fire dampers) can be controlled. Depending on the operating mode, the module can be switched or requested with Modbus standard registers or with BACnet objects. For manual control, the relay outputs are equipped with switches. The settings of the operating mode, bit rate and parity are made via two rotary switches. Operating mode, bit rate and parity also adjustable via software.

• for the control of an actuator, e.g. fire damper
• Connection options for actuators with open connection lines with pluggable push-in technology
• Supply voltage is also switching voltage
• Relay output suitable for inrush current 65 A < 20 ms (NO), continuous current 6A
• generous space for installation - no additional distribution box required

MB-DIO2/1-IP Modbus/BACnet 24V AC/DC

1108111326IP

The MB-DIO2/1-IP 24 V module in IP65 housing with 2 digital inputs, as well as 1 relay output, is suitable for the inclusion of decentralized signal contacts and the control of decentralized switching tasks. As signal contacts, e.g. window contacts or the positions of ventilation flaps, etc. can be detected and controlled for switching tasks, e.g. motorized actuators or light bands, etc. Actuators with AMP connectors (AMP brand from TE Connectivity) can be connected directly to the MB-DIO2/1-IP 24 V. Depending on the operating mode, the module can be switched or requested with Modbus standard registers or with BACnet objects.

• for the control of an actuator, e.g. fire damper
• Connection options for actuators with AMP plug-in connector or open connection lines with pluggable push-in technology
• Supply voltage is also switching voltage
• Relay output suitable for inrush current 65 A < 20 ms (NO), continuous current 6A
• generous space for installation - no additional distribution box required

MB-DIO4/2-IP Modbus/BACnet 230 V

1108120526IP

The MB-DIO4/2-IP 230 V module in IP65 housing with 4 digital inputs and 2 relay outputs is developed for decentralized switching tasks. Suitable, for example, to accommodate light switches and window contacts in a room, and to switch light strips or to use as blinds control. Motor-driven actuators (e.g. ventilation or fire dampers) can be controlled. Depending on the operating mode, the module can be switched or requested with Modbus standard registers or with BACnet objects. For manual control, the relay outputs are equipped with switches. The settings of the operating mode, bit rate and parity are made via two rotary switches. Operating mode, bit rate and parity also adjustable via software.

• for the control of up to two actuators, e.g. fire dampers
• Connection options for actuators with open connection lines with pluggable push-in technology
• Supply voltage is also switching voltage
• Relay output suitable for inrush current 65 A < 20 ms (NO), continuous current 6A, total current 8 A
• generous space for installation - no additional distribution box required

MB-DIO4/2-IP Modbus/BACnet 24V AC/DC

1108121326IP

The MB-DIO4/2-IP 24 V module in IP65 housing with 4 digital inputs, as well as 2 relay outputs, is suitable for the inclusion of decentralized signal contacts and the control of decentralized switching tasks. As signal contacts, e.g. window contacts or the positions of ventilation flaps, etc. can be detected and controlled for switching tasks, e.g. motorized actuators or light bands, etc. Actuators with AMP connectors (AMP brand from TE Connectivity) can be connected directly to the MB-DIO4/2-IP 24 V. Depending on the operating mode, the module can be switched or requested with Modbus standard registers or with BACnet objects.

• for the control of up to two actuators, e.g. fire dampers
• Connection options for actuators with AMP plug-in connector or open connection lines with pluggable push-in technology
• Supply voltage is also switching voltage
• Relay output suitable for inrush current 65 A < 20 ms (NO), continuous current 6A, total current 8A
• generous space for installation - no additional distribution box required

MR-DIO4/2-IP65 Modbus RTU 230 V

1108330526IP

The Modbus module inan IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs have to be connected to potentialfree contacts. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches. Bit rate and parity are also set by software.

MR-DIO4/2 Modbus RTU

1108331326

The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching 2 light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with 2 rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with screw type terminal blocks

MR-DIO4/2S Modbus RTU

110833132601

The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching 2 light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with 2 rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with screw type terminal blocks

MR-F-DIO4/2S Modbus RTU

11083313260170

The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching 2 light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with 2 rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

• Connection with spring clamp terminal blocks (push-in)