|

EW-DIO4/2

Description

The extension module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. With strong inductive loads, we recommend protecting the relay contacts with an RC element. The inputs can be used as contact or voltage inputs. The module can only be used in combination with devices from the EWIO product families (EWIO-9180 and EWIO-9180-M), which scans and switches the inputs and outputs. The module address is set by means of an address switch on the front. Suitable for decentralized mounting in serial sub-distributor.

Technical Data
General Data
EWIO internal
0 to 5
Two-wire bus
115200 bit/s
24 V AC/DC ± 10% (SELV)
200 mA (AC) / 75 mA (DC)
100 %
4 x digital
30 V DC
more than 7 V AC/DC
2 changeover contacts (DPST)
250 V AC
16 A / output
80 A (less than 20 ms)
Green, red and yellow LED
50 x 69.3 x 60 mm
126 g
-5 °C to +55 °C
-20 °C to +70 °C
IP40 / IP20
Check US distributor inventory
Accessories
Part number
1109531326
4250184137993
Downloads
  • 3D-Data (3D-Data 1109531326) - Registration required -
  • 3D-Data (3D_C18_BS) - Registration required -
  • Mounting note
  • ePLAN data - Registration required -
× Do you have any questions?