|

S0/M DT

Description

Pulse counter to count pulses that are generated by energy counters via reed contacts or passive transistor outputs (open collector) in proportion to the measured energy. The device has 2 single S0 inputs and a third switchable S0 pulse input to record for example double rate meters. It is also possible to collect pulses from any potential-free contact to count for example events up to a frequency of 15 Hz. The pulses generated by the energy counters are recorded by means of a standardized current interface to DIN EN 62053-3. The pulse counter is feeding the pulse generator that works like a passive two-pole with a direct voltage of 24 V and with a current between 10 and 27 mA for the switching state ON (active) and with 0 to 2 mA for the switching state OFF (passive). The input ST+/ST- is a double rate meter input that stores the S0 pulses of a counter in the counter register T1 or T2 depending on the wiring of input SE/SV. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

Connection with screw type terminal blocks

Technical Data
General Data
M-Bus
Two-wire bus
300 bit/s, 2400 bit/s and 9600 bit/s
24 V DC +/- 10 % (SELV)
50 mA DC
3 x S0 according to DIN EN 62053-31 Class A
LED
50 x 68 x 65 mm
approx. 70 g
-10 °C to 50 °C
-20 °C to 70 °C
IP40 / IP20
Check US distributor inventory
Part number
11055601
4250184163336
Downloads
× Do you have any questions?