BMT-RTR BACnet-Router


BMT-(F)-RTR is a compact Router and enables bidirectional data exchange between BACnet/IP and BACnet MS/TP fieldbus devices. The BMT-(F)-RTR can be connected to METZ CONNECT BACnet MS/TP devices via two 4-pole terminals on the front of the device and a jumper plug. An integrated web server is used for parameter settings, management and monitoring of the two interfaces (Ethernet / RS485). The web interface is also used to update the firmware. The BMT-(F)-RTR is suitable for decentralised mounting in electrical sub-distribution boards or in control cabinets on TH35 mounting rails in accordance with IEC 60715.

  • Connection with screw type terminal blocks
  • Access to 32 devices on the BACnet MS/TP bus
  • Bidirectional exchange of data between BACnet/IP and BACnet MS/TP devices
  • Protocol: BACnet MS/TP, BACnet/IP, BACnet Ethernet, HTTP 1.0
  • Integrated web server
  • Intuitive and software-independent TCP configuration via web interface
  • Recording and analysis of IP and RS485 communication
  • Simple device search of METZ CONNECT BACnet MS/TP devices on the RS485 bus
  • Fast connection of METZ CONNECT BACnet MS/TP devices via proven jumper plug technology
Technical Data
General Data
1 x Ethernet port (RJ-45 IEC 60603-7-51 (2010))
10/100 Mbits with auto-negotiation
BACnet IP, BACnet Ethernet, HTTP 1.0
9600 Bit/s to 115200 Bit/s
120 Ohm switchable
1,5 kV
24 V DC +/- 10 % (SELV)
50 mA
1.3 W
green LED
green LED (100 Mbit), yellow LED (10 Mbit)
green LED
35 x 69.3 x 60 mm
64 g
-5 °C to 55 °C
-20 °C to 70 °C
IP40 / IP20
Check US distributor inventory
Part number
× Do you have any questions?