KRS-E08 3 24V AC/DC
Description
The threshold gate switches units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay is activated. When the input voltage falls below the switch-off threshold, the relay is released again. The module is designed for a two-level control by means of an analog 0 to 10 V DC control signal.
- Connection with screw type terminal blocks
- Control signal 0 V DC = Level 1 active
- Control signal 5 V DC = No level is active (OFF)
- Control signal 10 V DC = Level 2 active
Technical Data
General Data
24 V AC/DC
100 mA
35 mA
250 V AC
1 x changeover contact with 0 position
AgSnO2
4 A
1200 cycles/h
1 x 107 switching cycles
1 x 105 switching cycles
Yellow and red LED
22.5 x 61.3 x 60 mm
70 g
-10 °C to 50 °C
-25 °C to 70 °C
IP40 / IP20
Check US distributor inventory
Part number
110673
4250184123002
Downloads
- 3D-Data - Registration required -
- Data sheet
- ePLAN data - Registration required -
FAQ's
What does H, R, P and V stand for in the name of the threshold controls, e.g. KRS-E08 HRP?
- H = Hand operation, the module can be controlled via a switch.
- R = Response, the module has an hand operation checkback function.
- P = Potentiometer, the module has an adjustable switch-on voltage and hysteresis.
- V = Verzögerung (delay), the module has a switch-on delay
