|

RJ45 patch cord – now fire-protected and for use in particularly harsh environments

Tuesday, February 16, 2021

The decision on which copper patch cord is the ideal solution for connecting end devices depends on several factors: The application area, durability, and transmission speed are just some of the crucial factors.

 RJ45 patch cable – now fire-protected and for use in particularly harsh environments

Whatever you decide, with copper patch cords from METZ CONNECT, optimally tailored to the requirements of all structural levels of local networks, you are sure to be on the safe side for the futur!

METZ CONNECT patch cords are always used where high-speed data transmission in local networks (LAN) is required. The patch cords are used for structured and application-neutral networks – Ethernet 100BaseT, 1000BaseT and 10 GBit Ethernet. In addition to voice and data communication, our solutions for remote powering of various end devices using Power over Ethernet and high-end video, e.g. B. HDBaseT suitable.


Patch cord CPR Fireprotect

RJ45 C6A AWG26 S/FTP LSHF, white

 RJ45 patch cable – now fire-protected and for use in particularly harsh environments

METZ CONNECT CPR patch cords are fully shielded and designed for transmission speeds up to 500 MHz and are particularly suitable for unshielded and shielded Class EA systems.

Due to the cable type used: S / FTP 4x2xAWG 26 PIMF with halogen-free and CPR Class Cca s1a d1 a1 cable sheath, they contribute significantly to preventing the spread of flames in the event of a fire!

Description

  • CPR-optimized patch cords with raw material of the fire class
    Cca s1a d1 a1
  • particularly suitable for unshielded and shielded Class EA systems
  • two shielded RJ45 plugs, wiring 1-1
  • Cable type: S / FTP 4x2xAWG 26 PIMF
  • Cable sheath: LSHF (LSOH) white, halogen-free
  • suitable for 10 GBit / s Ethernet (IEEE 802.3an) up to 60 m

  • Remote powering (PoE, PoE plus and UPoE) suitable

  • Suitable for VoIP, multimedia, broadband video

  • Kink protection injection molded with integrated locking lever protection

part number
item name
description
color
13084W0588-E
Patch cord C6ACPR AWG26 0.5 m
Patch cord CPR Fireprotect C6A AWG26 S/FTP LSHF 0,5 m
white
13084W1088-E
Patch cord C6ACPR AWG26 1.0 m
Patch cord CPR Fireprotect C6A AWG26 S/FTP LSHF 1,0 m
white
13084W2088-E
Patch cord C6ACPR AWG26 2.0 m
Patch cord CPR Fireprotect C6A AWG26 S/FTP LSHF 2,0 m
white
13084W3088-E
Patch cord C6ACPR AWG26 3.0 m
Patch cord CPR Fireprotect C6A AWG26 S/FTP LSHF 3,0 m
white
13084W5088-E
Patch cord C6ACPR AWG26 5.0 m
Patch cord CPR Fireprotect C6A AWG26 S/FTP LSHF 5,0 m
white
13084WA088-E
Patch cord C6ACPR AWG26 10 m
Patch cord CPR Fireprotect C6A AWG26 SFTP LSHF 10,0 m
white
13084WB088-E
Patch cord C6ACPR AWG26 20 m
Patch cord CPR Fireprotect C6A AWG26 SFTP LSHF 20,0 m
white


6kV Flex500 Outdoor patch cord, black

 RJ45 patch cable – now fire-protected and for use in particularly harsh environments

METZ CONNECT 6kV Flex500 outdoor patch cords are robust patch cords that are particularly suitable for use in drag chains and for use in harsh industrial environments, in meter cabinets and outdoor applications.

Due to their cable structure, these patch cords are very flexible, designed for small bending radii and a large number of bending cycles. Can be used in drag chains and is suitable for constantly moving applications on machines and systems.

Equipped with a resistant UV-resistant PUR outer jacket, the cables are insensitive to chemical stress and light. This also makes them suitable for outdoor use. For example, to connect a surveillance camera.

By complying with VDE-AR-N 4100: 2019-04 (6kV surge voltage test according to DIN EN 60664-1), laying in the meter space and electrical distributors is possible!

Range of applications for the patch cord RJ45 C6Flex500:

  • Industrial automation
  • machine tools and equipment
  • drag chain and energy chain
  • Industrial trucks
  • moving applications
  • outdoor applications (IP camera)
  • special applications
  • meter place and electrical distributor
Description:
  • RJ45 patch cords for industrial and outdoor applications
  • Shielded Cat.5e, Class E [A] RJ45 patch cords
  • Compliance with class EA channel link according to ISO / IEC 11801-1, DIN EN 50173-1
  • tested: channel link up to 500 MHz
  • suitable for 10 GBit / s Ethernet (IEEE 802.3an) up to 40 m
  • particularly suitable for unshielded and shielded Class EA systems
  • Robust and abrasion-resistant cable for industrial use, such as in mechanical and plant engineering. Also suitable for laying outdoors
  • Compliance with VDE-AR-N 4100: 2019-04 (6kV surge voltage test according to DIN EN 60664-1) when laying in the meter space and electrical distributors
  • Cable type: S / UTP 4x2xAWG24 / 7
  • Cable sheath LSHF (FRNC) PUR, black
  • Suitable for drag chains
  • two shielded RJ45 plugs, wiring 1 - 1
  • UV, oil resistant
  • Remote powering (PoE, PoE plus and UPoE)
  • suitable for IoT, M2M, IoT, HDBaseT, Industry 4.0, multimedia, broadband video
  • Overmolded anti-kink sleeve
  • significantly longer shelf life than standard patch cords
  • very short anti-kink sleeve
part number
item name
description
color
13084F0500-E
patch cord 6kV Flex500 0.5 m

Patch cord 6kV Flex500 Outdoor 0.5 m black

black
13084F1000-E
patch cord 6kV Flex500 1.0 m

Patch cord 6kV Flex500 Outdoor 1.0 m black

black
13084F2000-E
patch cord 6kV Flex500 2.0 m

Patch cord 6kV Flex500 Outdoor 2.0 m black

black
13084F3000-E
patch cord 6kV Flex500 3.0 m

Patch cord 6kV Flex500 Outdoor 3.0 m black

black
13084F5000-E
patch cord 6kV Flex500 5.0 m

Patch cord 6kV Flex500 Outdoor 5.0 m black

black
13084FA000-E
patch cord 6kV Flex500 10 m

Patch cord 6kV Flex500 Outdoor 10.0 m black

black
13084FB000-E
patch cord 6kV Flex500 20 m

Patch cord 6kV Flex500 Outdoor 20.0 m black

black


Order number code:

Flex500

Color: black only


Order number code: black

CPR

Color: only white


Order number code: white


The patch cords are ready-made with RJ45 plugs and available in different lengths. Intermediate lengths and special assemblies can also be configured using our cable configurator.

METZ CONNECT Configurator

Please note that the items in this configurator are custom-made products and are only available on request.


Do you have any questions on this topic?

Then simply contact your METZ CONNECT employee using the link below:

Your Contact Person

× Do you have any questions?