|

OpDAT WV – wall-mounted distributor for apartment buildings

Universally applicable distribution boxes for floor wiring or as a house distribution point in the equipment room. Now also as distribution cabinet for apartment buildings with up to 30 residential units.


OpDAT wall-mounted distributor for apartment houses

The new variant of the OpDAT wall-mounted distributor serves as a distribution cabinet for apartment buildings with up to 30 residential units. The strain relief system in combination with the single circuit, cassettes allow easy handling and a separate splice area for each residential unit.


Features

  • up to 5 single circuit splice cassette blocks, each with 6 splice cassettes, enable the fibers of each individual housing unit to be deposited and spliced separately
  • each splice cassette is equipped with 4 pigtails each. The pigtails are deposited separately and ready for splicing
  • each LC-Q coupling can be directly assigned to a splice cassette and thus to a housing unit
  • the innovative cable support ensures a safe strain relief of the incoming cables
  • of the incoming cables
  • in the patch area, incoming patch cables can be safely inserted and plugged in from above or below through a foam cable guide.
  • alternatively, a pre-assembled cable can be screwed in and intercepted as a connection between the house transfer point and the wall distributor
  • wall distributor size M
  • labeling fields in the doors

Application example

Apartment building with individual ADTs

Apartment building with individual ADTs


Equipment variants

  • equipped with single circuit splice cassette blocks, couplers and pigtails
  • each splice cassette block has 6 splice cassettes
  • each splice cassette is equipped with 4 pigtails. The pigtails are stored ready for splicing. Pigtail connectors cleaned and plugged into couplers, assignment according to color code IEC 6030
  • included in delivery:
    • cable entry brush strip
    • 3x stackable strain reliefs for up to 12 cables each
    • foam cable entry for patch cables
    • mounting set for wall mounting


OpDAT wall-mounted distributor for apartment houses


OpDAT wall-mounted distributor for apartment houses


Ordering information – Wall distributor for apartment buildings

COUPLING TYPE
APARTMENT UNITS
NUMBER OF PIGTAILS
ARTICLE NUMBER
LC-Q APC (green)
6
24
1503397A06-C
LC-Q APC (green)
12
48
1503397A12-C
LC-Q APC (green)
18
72
1503397A18-C
LC-Q APC (green)
24
96
1503397A24-C
LC-Q APC (green)
30
120
1503397A30-C

Further information on this topic:
Do you still have questions about this topic?

Then simply get in touch with your contact person via the following link:

Your contact person


× Do you have any questions?