|

BMT-DIO4/2-IP65 BACnet MS/TP 230 V

Description

The BACnet MS/TP module in IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard objects via a BACnet client. Module address and bit rate are set with two rotary switches.

BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Technical Data
General Data
BACnet MS/TP
00 to F9
RS485 (two-wire bus)
9600 to 115200 bits/s
230 V +/- 10 %
200 mA (AC) / 12 mA (DC)
100 %
4 x digital (contact)
2 changeover contacts (DPST)
250 V AC
8 A / output
10 A / output
Green, red and yellow LED
159 x 41.5 x 120 mm
350 g
-5 °C to 55 °C
-20 °C to 70 °C
IP65 / IP20
Check US distributor inventory
Accessory of
Part number
1108830526IP
4251122179013
Downloads
× Do you have any questions?