|

MB-DIO4/2-IP Modbus/BACnet 24V AC/DC

Description

The MB-DIO4/2-IP 24 V module in IP65 housing with 4 digital inputs, as well as 2 relay outputs, is suitable for the inclusion of decentralized signal contacts and the control of decentralized switching tasks. As signal contacts, e.g. window contacts or the positions of ventilation flaps, etc. can be detected and controlled for switching tasks, e.g. motorized actuators or light bands, etc. Actuators with AMP connectors (AMP brand from TE Connectivity) can be connected directly to the MB-DIO4/2-IP 24 V. Depending on the operating mode, the module can be switched or requested with Modbus standard registers or with BACnet objects.

  • for the control of up to two actuators, e.g. fire dampers
  • Connection options for actuators with AMP plug-in connector or open connection lines with pluggable push-in technology
  • Supply voltage is also switching voltage
  • Relay output suitable for inrush current 65 A < 20 ms (NO), continuous current 6A, total current 8A
  • generous space for installation - no additional distribution box required

BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI.

Technical Data
General Data
Modbus RTU / BACnet MS/TP
00 to EF
00 to EF
1200 to 115200 bit/s
19200 Bit/s Even
RS485 (two-wire bus)
24 V AC/DC +/- 10% (SELV)
80 mA (AC) / 25 mA (DC)
1
4
Contact
2 changeover contacts (DPST)
6 A per relay (65 A for 20 ms NO) max. current 8 A
175 x 75 x 175 mm
630 g
any
-5 °C to 55 °C
-20 °C to 70 °C
IP65
LED green, red, yellow
Check US distributor inventory
Accessories
Part number
1108121326IP
4251394658360
Downloads
× Do you have any questions?