Search form


Power supply NG4 HS

The NG4 HS power supply supplies a regulated direct voltage of 24 V DC / 16 W for supplying power to the respective devices of the product family of I/O components. The secondary voltage can only be tapped at the right side of the device front at a pluggable terminal block and at the screw-type terminal blocks. The bus communication can be tapped on both sides of the device front. A parallel operation of various power supply units is not allowed. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

Field of application LON (LF-xxx), BACnet (BMT-xxx), Modbus (MR-xxx)
Input voltage range 110 to 240 V AC, 50 / 60 Hz
Internal fuse, soldered fuse T 1.0 A/250 V
Output / power 16 W
Output / voltage +24 V DC (SELV)
Output / current 700 mA
Load and control accuracy +/-3 %
Mains failure backup smaller than 40 ms
Display green LED
Dimensions (W x H x D) 50 x 69.3 x 60 mm
Weight 108 g
Operating temperature range -5 °C to +55 °C
Storage temperature range -20 °C to +70 °C
Ingress protection for housing / terminal block IP40 / IP20
Terminal blocks
Wire cross section solid wire max. AWG 12 (4.0 mm²)
Wire cross section stranded wire max. AWG 14 (2.5 mm²)
Wire diameter min 0.3 mm up to max. 2.7 mm

Technical Data 

  • P/N110561
    Feature 2with jumper plug


lock ePLAN Daten 110561 715.98 KB
pdf Brochure LON FT5000 899908-01 EN 3.01 MB
pdf Data sheet 110561 179.22 KB
pdf Produktuebersicht C|Logline 899905-05 EN 4.58 MB
lock 3D data - STEP / IGES
1.38 MB

Related Topics:

last update on Tuesday, 27. March 2018 - 13:51