Search form


PT-C12, 230 V AC

The potential divider is used for dividing analog signals in a range from 0 to 10 V DC or 0 to 20 mA. The input and output signals and the supply are mutually isolated. An input signal (0 to 10 V DC or 0 to 20 mA) can be applied optionally to the potential divider. Independently of the type of signal on the input, a voltage of 0 to 10 V DC or a current of 0 to 20 mA can be measured on the output proportionally to the input signal. In addition, a manual emergency operation level with checkback is integrated. A fix 10 V DC signal can be scanned for anti-frost or similar equipment. If a voltage signal is used on input and output, use PT-C12,230. If a current signal is used on input and output, use PTi-C12,230.

Operating voltage 230 V AC
Test voltage / separation 1000 V DC
Input / voltage 0 V to 10 V DC
Input / current 0 V to 20 mA DC
Output / fix voltage 10 V DC / 5 mA, fix
Output / proportional voltage 0 to 10 V / max. 10 mA
Output / proportional current 0 to 20 mA
Output / current load max. 500 Ohm
Display Green LED
Dimensions (W x H x D) 35 x 69.3 x 60 mm
Weight 78 g
Operating temperature range 0 °C to +55 °C
Storage temperature range -20 °C to +70 °C
Ingress protection for housing / terminal block IP40 / IP20

Technical Data 

  • P/N110502
    Feature 1230 V AC
    Feature 2voltage balanced


pdf Instruction 110502 2.57 MB
pdf Produktuebersicht C|Logline 899905-05 EN 4.58 MB
last update on Wednesday, 21. February 2018 - 4:53