Search form

Languages

S0/M converter

Pulse counter to count pulses that are generated by energy counters via reed contacts or passive transistor outputs (open collector) in proportion to the measured energy. The device has 2 single S0 inputs and a third switchable S0 pulse input to record for example double rate meters. It is also possible to collect pulses from any potential-free contact to count for example events up to a frequency of 15 Hz. The pulses generated by the energy counters are recorded by means of a standardized current interface to DIN EN 62053-3. The pulse counter is feeding the pulse generator that works like a passive two-pole with a direct voltage of 24 V and with a current between 10 and 27 mA for the switching state ON (active) and with 0 to 2 mA for the switching state OFF (passive). The input ST+/ST- is a double rate meter input that stores the S0 pulses of a counter in the counter register T1 or T2 depending on the wiring of input SE/SV.Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.

Protocol M-Bus
Transmission rate 1200 Bit/s to 19200 Bit/s
Operating voltage 24 V DC
Current consumption 50 mA
Inputs 3 x S0 according to DIN EN 62053-31 Class A
Display LED
Dimensions W x H x D 50 x 68 x 65 mm
Weight about 70 g
Operating temperature range -10 °C to +55 °C
Storage temperature range -20 °C to +70 °C
Type of protection housing / terminal blocks IP40 / IP20

Technical Data 

  • P/N11055601
    Farbegray
    EAN-No4250184163336

Downloads

lock ePLAN Daten 11055601 280.48 KB
pdf Instruction 11055601 742.54 KB
lock 3D data - STEP / IGES
11055601
667.41 KB
last update on Wednesday, August 23, 2017 - 03:22