Search form



CAN module with 4 analog outputs. It is suitable as encoder for control variables, for example for electrical vent and mixing valves, valve positions, etc. The fieldbus module is an output module for universal use. It is controlled by means of the CAN bus. The module is addressed by means of an adjustable address, and the output states are transmitted in data bytes. If there is an analog input module with the same address in the system, the voltage measured there is issued at the respective output.

Protocol CAN
Addressing range 00 to 99
Bus interface ©CiA standard 2.0B passive (two-wire bus)
Transmission rate 20 to 500 kBit/s
Operating voltage range 20 V to 28 V AC/DC (SELV)
Current consumption 90 mA (AC) / 32 mA (DC)
Relative duty cycle 100 %
Recovery time 550 ms
Outputs 4 x analog
Output / voltage 0 V to 10 V DC
Output / current 5 mA at 10 V DC
Output / resolution 10 mV / digit
Output / switching voltage +/- 1%
Display Green and red LED
Dimensions (W x H x D) 35 x 70 x 65 mm
Weight 84 g
Operating temperature range -5 °C to +55 °C
Storage temperature range -20 °C to +70 °C
Ingress protection for housing / terminal block IP40 / IP20

Technical Data 

  • P/N1105731302
    Feature 1
    Feature 2


pdf Produktuebersicht C|Logline 899905-05 EN 3.55 MB
last update on Tuesday, 6. September 2016 - 4:30