Search form



CAN module with 4 digital outputs. It is suitable for switching electrical components, for example motors, contactors, lamps, louvers, etc. With strong inductive loads, we recommend protecting the relay contacts additionally with an RC element. The fieldbus module is an input module for universal use. It is controlled by means of the CAN bus. The module is addressed by means of an adjustable address. Data bytes transmit whether data are queried or commands are executed. If there is a digital input module with the same address in the system, the module can be operated by remote control.

Protocol CAN
Addressing range 00 to 99
Bus interface ©CiA standard 2.0B passive (two-wire bus)
Transmission rate 20 to 500 kBit/s
Operating voltage range 20 V to 28 V AC/DC (SELV)
Current consumption 205 mA (AC) / 67 mA (DC)
Relative duty cycle 100 %
Recovery time 550 ms
Output / contacts 4 x changeover contacts (4 DPST)
Output / switching voltage 250 V AC
Output / continuous current 5 A / output
Output / total current max. 12 A / all outputs
Display Green, red and yellow LED
Dimensions (W x H x D) 35 x 70 x 75 mm
Weight 104 g
Operating temperature range -5 °C to +55 °C
Storage temperature range -20 °C to +70 °C
Ingress protection for housing / terminal block IP40 / IP20

Technical Data 

  • P/N1105701321
    Feature 1
    Feature 2


pdf Produktuebersicht C|Logline 899905-05 EN 3.55 MB
last update on Tuesday, 6. September 2016 - 4:30