Search form



The annunciator module can indicate to 10 incoming messages by means of a relay. The relay is activated as soon as a voltage is applied to min. one of the 10 inputs. The supply voltage has to be applied continuously to the terminals L1 - N. Several modules with the same voltage can be grouped over the input/output "S". As soon as one relay of the modules is activated, all other relays of the modules operated in parallel are activated.

  • Cascade connection of the devices possible
  • 10 signal inputs
  • Connection with screw-type terminals
Operating voltage 24 V AC/DC, 230 V AC/DC
Power consumption: 24 V AC/DC 20 mA
Power consumption: 230 V AC/DC 20 mA
Output / contact 1 changeover contact (SPDT)
Output / contact material AgNi
Output / switching voltage 250 V
Output / continuous current 4 A
Output / switching frequency 1200 cycles/h
Response time 10 ms
Release time 5 ms
Mechanical endurance 1 x 107 switching cycles
Electrical endurance 1 x 105 switching cycles
Cross-section 2.5 mm2
Dimensions (W x H x D) 22.5 x 60 x 60 mm
Weight 70 g
Operating temperature range -10 °C to +55 °C
Storage temperature range -25 °C to +70 °C
Ingress protection for housing / terminal block IP40 / IP20

Technical Data 

  • P/N110518
    Feature 1230 V AC
    Feature 21 DPST


pdf Produktuebersicht C|Logline 899905-05 EN 3.55 MB
last update on Tuesday, 6. September 2016 - 4:30