搜索表单

语言

联系方式

联系方式

METZ CONNECT
(Singapore) PTE. LTD.
1 Kaki Bukit Ave 3
# 04-08 KB-1
Singapore 416087
电话 +65.6747.0998
传真 +65.6746.3120
 
 
上海办事处:
徐汇区田林路140号28号楼1F-25室
邮编 :200233
电话: +86.21.33634228
             +86.21.33634334
传真: +86.21.33634224

总代理:广州市羽讯电子科技有限公司
广州市天河区珠江新城华强路3号富力盈力大厦北塔1305室
邮编:510623
电话:+86.20.38039260
传真:+86.20.38039287

 

 

 

 

你在这里

传统继电器技术

LTRk-E12 | 230 V AC

1. If you directly select level 2, level 1 is first activated for the adjusted start-up time so that the fan can accelerate to nominal speed. Then level 2 is activated., 2. When...

LTRk-E12 | 24 V AC/DC

1. If you directly select level 2, level 1 is first activated for the adjusted start-up time so that the fan can accelerate to nominal speed. Then level 2 is activated., 2. When...

DRIW-E16 | 230 V AC

The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for...

DRIW-E16 | 24 V AC/DC

The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for...

Two-wire Sensor (5 ... 60 V DC)

The sensor has the following main components:, 1. Oscillator (LC resonator), 2. Demodulator, 3. Bistable amplifier, 4. Amplifier,

Mounting bracket HWR

To fasten sensors with max. diameters of 18 mm. For universal mounting. An auxiliary cam for shafts with diameters of up to 45 mm is included in the delivery.,

Mounting bracket HWF

To fasten sensors with max. diameters of 18 mm. Ideal for fastening on flat irons. An auxiliary cam for shafts with diameters of up to 45 mm is included in the delivery.,

Auxiliary cam for shafts up to 80 mm

Auxiliary cam for shafts with diameters up to 80 mm.,

CPW-E12 | 230 V AC | Input = 1 - 10 A

The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (...

CPW-E12 | 230 V AC | Input = 0.2 - 2.5 A

The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (...